Refereed Conferences

[Back]

1. Detrick M., Washington G.N., “Modeling and Design of a Morphing Wing for Micro Unmanned Aerial Vehicles via Active Twist”, 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2007, AIAA 2007-1788


2. Headings L., Jaworski C., Heremans J., Guezennec Y., Rizzoni G., Washington, Marano V. “Opportunities for Thermoelectric Energy Conversion in Hybrid Vehicles ”, Proc. of IMECE 2006 ASME International Mechanical Engineering Congress and Exposition, IMECHE2006-15085.


3. Headings L.M., Washington G.N., "Stiffness Controlled Piezoelectric Stick-Slip Actuator for Rapid Positioning Applications", ASME International Mechanical Engineering Congress and Exposition, 2005, Paper#80916


4. Faidley L., Dapino M.J., Washington G.N., "Strain Model for Ni-Mn-Ga with Collinear Field and Stress", ASME International Mechanical Engineering Congress and Exposition, 2005, Paper#79092


5. Westervelt, E.R., Schmiedler J.P., Washington G.N., “Variable Transmission Compliance with an MR Damper”, ASME International Mechanical Engineering Congress and Exposition , 2004, Paper #62046


6. Bechtel S., Washington G.N., Ahkmadkhanlou F., Wang Y., “Microstructural Analysis and Control of a Magnetorheological Fluid”, ASME International Mechanical Engineering Congress and Exposition , 2004, Paper #61693


7. Yoon H.S., Washington G.N., “Active Vibration Confinement of Flexible Structures using Modal Observers”, International Conference on Adaptive Structure Technologies , 2004, Paper #43185


8. Danak A. D., Yoon H.S., Washington G.N., “Optimization of Electrical Output in Response to Mechanical Input Piezoelectric Laminated Shells”, ASME International Mechanical Engineering Congress and Exposition , 2003, Paper #43185


9. Roy A.M., Neelakantan V.A., Washington G.N., “Design and Development of Passive and Active Force Feedback Systems using Magnetorheological Fluids”, ASME International Mechanical Engineering Congress and Exposition , 2003, Paper #43210


10. Faidley L.E., Dapino M.D., Washington G.N. “Dynamic Response in the Low-Khz Range and Delta-E Effect in Ferromagnetic Shape Memory Ni-MN-GA”, ASME International Mechanical Engineering Congress and Exposition , 2003, Paper #43198


11. Rajagopalan R., Washington G., “Intelligent Control of Hybrid Electric Vehicles using GPS Information”, Society of Automotive Engineers – Future Car Congress , 2002 Paper# 02FCC-35


12. Neelakantan, V.A. and Washington, G.N., “Effect of Centrifugal Force on Magneto-Rheological Fluid Clutches”, ASME International Mechanical Engineering Congress and Exposition, 2002, Paper # ASMS #49


13. Sivasubramaniam M. and Washington , G.N., “Independent Modal Sliding Mode Shape and Vibration Control Using a Stereophotogrammetric Measurement System”, ASME Int. Congress and Exposition, 2002, Paper # ASMS #48


14. Kwak, S.K. and Washington , G.N., “Energy Analysis for a Twisting and Bending Coupled Piezoelectric Actuator for Miniature Unmanned Aerial Vehicles”, ASME Int. Cong. and Exposition , 2001 ,Paper # AD-23739


15. Borgen, M.G., and Washington, G.N., “Modeling and Testing of an Autonomous Swimming Vehicle Powered Via Smart Materials', ASME Int. Cong. and Exposition , 2001 ,Paper # AD-23751


16. Angelino, M. and G. Washington, “Design of a Piezoelectric Actuated Active Aperture Antenna,” Adaptive Structures and Material Systems Symposium, ASME Int. Cong. and Exposition , 2000 .


17. Borgen, M., G. N. Washington, and G. Kinzel, “Design of Swimming Vehicles Using Smart Material Actuation,” 7th Mechatronics Forum Int. Conference , 2000.


18. Borgen, M., G. N. Washington, and G. Kinzel, “Introducing the Carangithopter: A Small Piezoelectrically Actuated Swimming Vehicle,” Adaptive Structures and Material Systems Symposium, ASME International Congress and Exposition , 2000.


19. Kwak, S. K. and G. N. Washington, “A New Twisting and Bending Coupled Piezoelectric Actuator Using Shaped Electrodes,” Adaptive Structures and Material Systems Symposium, ASME Int. Cong. and Exposition , 2000.


20. Kwak, S. K., G. N. Washington, and R. Yedavalli, “Implementation of Full State Derivative Feedback Control Based on the Reciprocal State Space Framework Using Smart Materials,” Proc. SPIE 7th Int. Symposium on Smart Structures and Materials , 2000.


21. Romanofsky, R., J. Bernhard, G. N. Washington, F. VanKeuls, F. Miranda, and C. Cannedy, “AK Band Phased Array Antenna Based on Ba 0.60 Sr 0.40 Ti O3 Thin Film Phase Shifters,” IEEE Conference on Microwave Theory and Techniques , 2000.


22. Brahma A., B. Glenn, Y. Guezennec, T. Miller, G. Rizzoni, and G. N. Washington, “Modeling, Performance Analysis and Control Design of a Hybrid Sport-Utility Vehicle,” IEEE Int. Conference on Control Applications , 1999.


23. Glenn, B., G. N. Washington, and G. Rizzoni, “Intelligent Control of Parallel Hybrid Electric Vehicles,” ASME Int. Cong. and Exposition , 1999.


24. Kwak, S. K., G. Washington, and R. Yedavalli, “Active and Passive Vibration Control of Landing Gear Components,” ASME Int. Cong. and Exposition , 1999.


25. Mayhan, P., K. Srinivasan, and G. N. Washington, “Dynamic Modeling of a Piezoelectric Actuation System for Machine Tool Position Control,” ASME Int. Cong. and Exposition , 1999.


26. Theunissen, W. H., H. S. Yoon, G. N. Washington, and W. D. Burnside, “Mechanical Finite Element Diffraction Synthesis of Reconfigurable Contour Beams from Dual Offset Reflector Antennas,” IEEE Antennas and Propagation Society Int. Symposium , 1999.


27. Washington , G. and J. Redmond, “Adaptive Structures and Material Systems,” ASME Int. Cong. and Exposition , 1999.


28. Washington , G. N. and H. S. Yoon, “Zero G Validation of Smart Aperture Antennas,” ASME Int. Cong. and Exposition , 1999.


29. Kiely, E., G. N. Washington, J. K. Song, “Analysis and Control of Mesoscale Actuator Systems,” Adaptive Structures and Material Systems Symposium, ASME Int. Cong. and Exposition , 1998.


30. Yoon, H. S. and G. N. Washington, “Analysis of Doubly Curved Antenna Structures,” Adaptive Structures and Material Systems Symposium, ASME Int. Cong. and Exposition , 1998.


31. G. Rizzoni, A. Keyhani, G. Washington, B. Chandrasekaran, G. Baumgartner, “Education in Mechatronic Systems at the Ohio State University”, DSC-Vol.64 Proceedings of the ASME Dynamic Systems and Control Division, 1998 ASME International Mechanical Engineering Conference and Exhibition, Abaheim, CA, November15-20


32. Washington, G. N., “Active Aperture Antennas,” Adaptive Structures Forum, ASME Int. Cong. and Exposition , 1996.


33. Washington , G. N. and L. M. Silverberg, “Uniform Damping and Stiffness Control of Distributed Parameter Systems,” Active Control of Vibration and Noise Conference, ASME Int. Cong. and Exposition , 1996.


34. Washington , G. N. and E. C. Klang, “Modeling and Analysis of Doubly Curved Aerobrake Truss Structures,” Proc. 3rd Int. Conference on Engineering Construction and Operations in Space, 1992.


35. Klang, E. C. and G. N. Washington, “Aerobrake Construction Concepts for the Mars Mission ,” Proc. 2nd Int. Conference on Engineering Construction and Operations in Space, 1990.