The Ohio State University

www.osu.edu

  1. Help
  2. Campus map
  3. Find people
  4. Webmail
  5. Search Ohio State

The Ohio State University

Journal Articles

  • C. Duan and R. Singh, Forced Vibrations of a Torsional Oscillator with Coulomb Friction Under a Periodically Varying Normal Load, Journal of Sound and Vibration, 325, 499-506, 2009 (doi:10.1016/j.jsv.2009.04.003). [J174]

  • J.-Y. Park and R. Singh, Analysis of Powertrain Motions Given a Combination of Active and Passive Isolators, Noise Control Engineering Journal, 57 (3), 232-243, 2009. [J173]
  • S. He, T. Rook and R. Singh, Construction of Semianalytical Solutions to Spur Gear Dynamics Given Periodic Mesh Stiffness and Sliding Friction Functions, ASME Journal of Mechanical Design, 130 (122601), 1-9, 2008 (doi: 10.1115/1.2988478). [J172]
  • A. Inoue and R. Singh, Errors Associated with Transfer Path Analysis when Rotations are not Measured, 2008 SAE Transactions Journal of Passenger Cars: Mechanical Systems, vol. V116-6, Paper # 2007-01-2179. Link: http://www.sae.org/technical/papers/2007-01-2179.  [J171]
  • J. S. Gurm, W. J. Chen, A. Keyvanmanesh, T. Abe, A. R. Crowther and R. Singh, Transient Clunk Response of a Driveline System: Laboratory Experiment and Analytical Studies, 2008 SAE Transactions Journal of Passenger Cars: Mechanical Systems, vol. V116-6, Paper # 2007-01-2233. Link: http://www.sae.org/technical/papers/2007-01-2233.  [J170]
  • A. R. Crowther, J. Yoon and R. Singh, An Explanation for Brake Groan Based on Coupled Brake-Driveline System Analysis, 2008 SAE Transactions Journal of Passenger Cars: Mechanical Systems, vol. V116-6, Paper # 2007-01-2260. Link: http://www.sae.org/technical/papers/2007-01-2260.  [J169]
  • A. Crowther and R.Singh, Identification and quantification of stick-slip induced brake groan events using experimental and analytical investigations, Noise Control Engineering Journal, 56(4), 235-255, 2008. [J168]
  • S. He, R. Singh and G. Pavic, Effect of Sliding Friction on Gear Noise Based on a Refined Vibro-Acoustic Formulation, Noise Control Engineering Journal, 56(3), 164-175, 2008. [J167]
  • C. Duan and R. Singh, Isolated Sub-harmonic Resonance Branch in the Frequency Response of an Oscillator with Slight Asymmetry in the Clearance, Journal of Sound and Vibration, 314(1-2), 12-18, 2008 (doi: 10.1016/j.jsv.2007.12.040). [J166]

  • S. He and R. Singh, Dynamic Transmission Error Prediction of Helical Gear Pair under Sliding Friction using Floquet Theory, ASME Journal of Mechanical Design, 130 (052603), 1-9, 2008 (doi: 10.1115/1.2890115). [J165]

  • J. Y. Park and R. Singh, Effect of Non-Proportional Damping on the Torque Roll Axis Decoupling of an Engine Mounting System, Journal of Sound and Vibration, 313, 841-857, 2008 (doi:10.1016/j.jsv.2007.12.007). [J164]

  • A. Inoue, R. Singh and G. A. Fernandes, Absolute and Relative Path Measures in a Discrete System by Using Two Analytical Methods, Journal of Sound and Vibration, 313, 696,722, 2008 (doi:10.1016/j.jsv.2007.09.058). [J163]

  • J. H. Lee and R. Singh, Existence of Super-Harmonics in Quarter-Vehicle System Responses with Non-Linear Inertia Hydraulic Track Mount Given Sinusoidal Force Excitation, Journal of Sound and Vibration, 313, 367-374, 2008 (doi:10.1016/j.jsv.2008.02.025). [J162]

  • J. H. Lee and R. Singh, Non-Linear Frequency Responses of Quarter Vehicle Models with Amplitude-Sensitive Engine Mounts, Journal of Sound and Vibration, 313, 784-805, 2008 (doi:10.1016/j.jsv.2007.12.006). [J161]

  • C. Duan and R. Singh, Dynamics of a Torsional System with Harmonically Varying Dry Friction Torque, Journal of Physics: Conference Series, 96, paper 012114, 2008 (doi:10.1088/1742-6596/96/1/012114). [J160]

  • J. H. Lee and R. Singh, Critical Analysis of Analogous Mechanical Models Used to Describe Hydraulic Engine Mounts, Journal of Sound and Vibration, 311 (3-5), 1457-1464, 2008. [J159]

  • S. He, S. Cho and R. Singh, Prediction of Dynamic Friction Forces in Spur Gears Using Alternate Sliding Friction Formulations, Journal of Sound and Vibration, 309(3-5), 843-851, 2008. [J158]

  • C. Duan, T. E. Rook and R. Singh, Sub-harmonic Resonance in a Nearly Pre-loaded Mechanical Oscillator, Nonlinear Dynamics (Special issue on Discontinuous Dynamical Systems), 50(3), 639-650, Nov. 2007. [J157]

  • A. R. Crowther and R. Singh, Analytical Investigation of Stick-Slip Motions in Coupled Brake-Driveline Systems, Nonlinear Dynamics (Special issue on Discontinuous Dynamical Systems), 50(3), 463-481, Nov. 2007. [J156]

  • S. He and R. Singh, Discontinuous Compliance Non-Linearities in the Hydraulic Engine Mount, Journal of Sound and Vibration, 307, 545-563, Nov. 2007. [J155]

  • A. R. Crowther, C. Janello and R. Singh, Quantification of Clearance-Induced Impulsive Sources in a Torsional System, Journal of Sound and Vibration, 307, 428-451, Nov. 2007. [J154]

  • A. R. Crowther, R. Singh, N. Zhang and C. Chapman, Impulsive Response of an Automatic Transmission System with Multiple Clearances: Formulation, Simulation and Experiment, Journal of Sound and Vibration, 306, 444-466, Oct. 2007. [J153]

  • S. Kim and R. Singh, Gear Surface Roughness Induced Noise Prediction Based on a Linear Time-Varying Model with Sliding Friction, Journal of Vibration and Control, 13(7), 1045-1063, Jul. 2007. [J152]

  • C. Duan and R. Singh, Dynamic Analysis of Preload Non-linearity in a Mechanical Oscillator, Journal of Sound and Vibration, 301, 963-979, Apr. 2007. [J151]

  • S. He, R. Gunda and R. Singh, Effect of Sliding Friction on the Dynamics of Spur Gear Pair with Realistic Time-Varying Stiffness, Journal of Sound and Vibration, 301, 927-949, Apr. 2007. [J150]

  • S. He and R. Singh, Approximate Step Response of a Non-Linear Hydraulic Mount Using a Simplified Linear Model, Journal of Sound and Vibration, 299(3), 656-663, Jan. 2007. [J149]

  • S. He, R. Gunda and R. Singh, Inclusion of Sliding Friction in Contact Dynamics Model for Helical Gears, ASME Journal of Mechanical Design (Special Supplement on Design of Direct Contact Mechanisms), 129(1), 48-57, Jan. 2007. [J148]

  • A. Inoue, S. Kim and R. Singh, Comparative Evaluation of Structure-Borne Noise Transfer Paths in a Laboratory Experiment, Noise Control Engineering Journal, 54(6), 382-395, Nov.-Dec. 2006. [J147]

  • S. Kim and R. Singh, High Frequency Energy Characterization of Beam Structures Based Only on Driving Point Mobility or Impedance, Journal of Sound and Vibration, 295(3-5), 1076-1084, 2006. [J146]

  • C. Duan and R. Singh, Influence of Harmonically-Varying Normal Load on Steady State Behavior of a 2DOF Torsional System with Dry Friction, Journal of Sound and Vibration, 294(3), 503-528, 2006. [J145]

  • C. Duan and R. Singh, Stick-Slip Behavior of Torque Converter Clutch, 2005 SAE Transactions Journal of Passenger Cars: Mechanical Systems, Paper # 2005-01-2456, published in Mar. 2006. [J144]

  • S. Kim and R. Singh, Alternate Methods for Characterizing Spectral Energy Inputs Based Only on Driving Point Mobilities or Impedances, Journal of Sound and Vibration, 291(3-5), 604-626, 2006. [J143]

  • C. Duan and R. Singh, Dynamics of a 3DOF Torsional System with a Dry Friction Controlled Path, Journal of Sound and Vibration, 289(4-5), 657-688, 2006. [J142]

  • S. He and R. Singh, Estimation of Amplitude and Frequency Dependent Parameters of Hydraulic Engine Mount Given Limited Dynamic Stiffness Measurements, Noise Control Engineering Journal, 53(6), 271-285, 2005. [J141]

  • V. Asnani, R. Singh, and S. Yurkovich, Active Control of Amplitude or Frequency Modulated Sounds in a Duct, Noise Control Engineering Journal, 53(5), 211-221, 2005. [J140]

  • P. Wickramarachi, R. Singh, and G. Bailey, Analysis of Friction-Induced Vibration Leading to "EEK" Noise in a Dry Friction Clutch, Noise Control Engineering Journal, 53(4), 122-128, 2005. [J139]

  • H. Lee and R. Singh, Self and Mutual Radiation from Flexural and Radial Modes of a Thick Annular Disk, Journal of Sound and Vibration, 286(4-5), 1032-1040, 2005. [J138]

  • H. Lee and R. Singh, Comparison of Two Analytical Methods Used to Calculate Sound Radiation from Radial Vibration Modes of a Thick Annular Disk, Journal of Sound and Vibration, 285(4-5), 1210-1216, 2005. [J137]

  • C. Duan and R. Singh, Transient Responses of a 2DOF Torsional System with Non-Linear Dry Friction Under Harmonically-Varying Normal Load, Journal of Sound and Vibration, 285(4-5), 1223-1234, 2005. [J136]

  • C. Duan and R. Singh, Super-Harmonics in a Torsional System with Dry Friction Path Subject to Harmonic Excitation Under a Mean Torque, Journal of Sound and Vibration, 285(4-5), 803-834, 2005. [J135]

  • H. Lee and R. Singh, Acoustic Radiation from Out-of-Plane Modes of an Annular Disk Based on Thick Plate Theory, Journal of Sound and Vibration, 282(1-2), 313-339, 2005. [J134]

  • T.C. Kim, T.E. Rook and R. Singh, Effect of Nonlinear Impact Damping on the Frequency Response Characteristics of a Torsional System with Clearance, Journal of Sound and Vibration, 281(3-5), 995-1021, 2005. [J133]

  • T.C. Kim, T.E. Rook and R. Singh, Super- and Sub-harmonic Response Calculations for a Torsional System with Clearance Non-linearity using Harmonic Balance Method, Journal of Sound and Vibration, 281(3-5) , 965-993, 2005. [J132]

  • H. Lee and R. Singh, Determination of Sound Radiation from a Simplified Disk-Brake Rotor by a Semi-Analytical Method, Noise Control Engineering Journal, 52(5), 225-239, Sept.-Oct. 2004. [J131]

  • S. Kim and R. Singh, Structure-Borne Noise Measures and Their Correlation to Sound Radiation over a Broad Range of Frequencies, 2003 SAE Transactions Journal of Passenger Cars: Mechanical Systems, 112(6), 1617-1626, (2003-01-1450), published in Sept. 2004. [J130]

  • S. Kim and R. Singh, Examination of Some Vibration Isolator Models and Their Effects on Vibration and Structure-borne Noise Transmission, 2003 SAE Transactions Journal of Passenger Cars: Mechanical Systems, 112(6), 1702-1712, (2003-01-1477), published in Sept. 2004. [J129]

  • M. G. Foulkes, J. P. De Clerck and R. Singh, Vibration Characteristics of Cardboard Inserts in Shells, 2003 SAE Transactions Journal of Passenger Cars: Mechanical Systems, 112(6), 1718-1725, (2003-01-1489), published in Sept. 2004. [J128]

  • P. Mehta and R. Singh, Estimation of Dynamic Stiffness Matrix of Welded or Glued Joints Using a Laboratory Fixture, 2003 SAE Transactions Journal of Passenger Cars: Mechanical Systems, 112(6), 2227-2237, (2003-01-1710), published in Sept. 2004. [J127]

  • P. Mehta and R. Singh, Effect of Welded or Glued Joints on Modal Properties of an Assembly, 2003 SAE Transactions Journal of Passenger Cars: Mechanical Systems, 112(6), 2256-2269, (2003-01-1717), published in Sept. 2004. [J126]

  • H. Adiguna, M. Tiwari, R. Singh, H.E. Tseng and D. Hrovat, Transient Response of Hydraulic Engine Mount, Journal of Sound and Vibration, 268(2), 2003. [J125]

  • M. Tiwari, H. Adiguna, and R. Singh, Experimental Characterization of a Nonlinear Hydraulic Engine Mount, Noise Control Engineering Journal, 51(1), 36-49, 2003. [J124]

  • R. Singh and S. Kim, Examination of Multi-Dimensional Vibration Isolation Measures and Their Correlation to Sound Radiation over a Broad Range of Frequencies, Journal of Sound and Vibration, 262(3), 419-455, 2003. [J123]

  • T.C. Kim, T.E. Rook and R. Singh, Effect of Smoothening Functions on the Frequency Response of and Oscillator with Clearance Non-Linearity, Journal of Sound and Vibration, 263(3), 665-678, 2003. [J122]

  • M. Vaishya and R. Singh, Strategies for Modeling Friction in Gear Dynamics, ASME Journal of Mechanical Design, 125, 383-393, 2003. [J121]

  • R. Singh, A. Selamet and B.C. Nakra, Report on the Proceedings of the 2001 India-USA Symposium on Emerging Tends in Vibration and Noise Engineering, Journal of Sound and Vibration, 262(3), 383-389, 2003. [J120]

  • A. Nejade and R. Singh, Flexural Intensity Measurement on Finite Plates Using Modal Spectrum Ideal Filtering, Journal of Sound and Vibration, 256(1), 33-63, 2002. [J119]

  • S. Kim and R. Singh, Examination of High Frequency Characterization Methods for Mounts, SAE Transactions Journal of Passenger Cars: Mechanical Systems, Vol. 110, Section 6, 1625-1633 (Paper # 2001-01-1444), 2002. [J118]

  • J. Kim and R. Singh, Effect of Visco-Elastic Patch Damping on Casing Cover Dynamics, SAE Transactions Journal of Passenger Cars: Mechanical Systems, Vol. 110, Section 6, 1695-1703 (Paper # 2001-01-1463), 2002. [J117]

  • T. C. Kim and R. Singh, Dynamic Interactions Between Loaded and Unloaded Gear Pairs Under Rattle Conditions, SAE Transactions Journal of Passenger Cars: Mechanical Systems, Vol. 110, Section 6, 1934-1943 (Paper # 2001-01-1553), 2002. [J116]

  • M. Vaishya and R. Singh, Sliding Friction Induced Non-linearity and Parametric Effects in Gear Dynamics, Journal of Sound and Vibration, 248(4), 671-694, 2001. [J115]

  • M. Vaishya and R. Singh, Analysis of Periodically Varying Gear Mesh Systems with Coulomb Friction Using Floquet Theory, Journal of Sound and Vibration, 243(3), 525-545, 2001. [J114]

  • C. M. Richards and R. Singh, Characterization of Rubber Isolator Non-Linearities in the Context of Single and Multi-Degree-of-Freedom Experimental Systems, Journal of Sound and Vibration, 247(5), 807-834, 2001. [J113]

  • T. Jeong and R. Singh, Inclusion of Measured Frequency- and Amplitude-Dependent Mount Properties in Vehicle or Machinery Models, Journal of Sound and Vibration, 245(3), 385-415, 2001. [J112]

  • S. Kim and R. Singh, Multi-Dimensional Characterization of Vibration Isolators over a Wide Range of Frequencies, Journal of Sound and Vibration, 245(5), 877-913, 2001. [J111]

  • S. Kim and R. Singh, Vibration Transmission Through an Isolator Modelled by Continuous System Theory, Journal of Sound and Vibration, 248(5), 925-953, 2001. [J110]

  • T. Jeong and R. Singh, Analytical Methods of Decoupling the Automotive Engine Torque Roll Axis, Journal of Sound and Vibration, 234(1), 85-114, 2000. [J109]

  • C. L. Gaillard and R. Singh, Dynamic Analysis of Automotive Clutch Dampers, Applied Acoustics, 60, 399-424, 2000. [J108]

  • C.M. Richards and R. Singh, Authors Response on the “Identification of Multi-Degree-of-Freedom Nonlinear Systems Under Random Excitations by the “Reverse Path” Spectral Method”, Journal of Sound and Vibration, 237(2), 358-360, 2000. [J107]

  • C.M. Richards and R. Singh, Comparison of two non-linear identification approaches derived from “reverse path” spectral analysis, Journal of Sound and Vibration, 237(2), 361-376, 2000. [J106]

  • R. Singh, Dynamic Design of Automotive Systems: Engine Mounts and Structural Joints, SADHANA (Indian Academy of Sciences), 25(113), 319-330, 2000. [J105]

  • S. W. Kung and R. Singh, Development of Approximate Methods for the Analysis of Patch Damping Concepts, Journal of Sound and Vibration, 219(5), 785-812, 1999. [J104]

  • C. M. Richards and R. Singh, Feasibility of Identifying Nonlinear Vibratory Systems Consisting of Unknown Polynomial Forms, Journal of Sound and Vibration, 220(3), 413-450, 1999. [J103]

  • R. Gunda, S. Vijayakar, R. Singh and J.E. Farstad, Harmonic Green’s Functions of a Semi-Infinite Plate with Clamped or Free Ends, Journal of Acoustical Society of America, 103(2), 888-899, 1998. [J102]

  • H. Vinayak and R. Singh, Multi-Body Dynamics and Modal Analysis of Compliant Gear Bodies, Journal of Sound and Vibration, 210(2), 171-214, 1998. [J101]

  • T.E. Rook and R. Singh, Structural Intensity Calculations for Compliant Plate-Beam Structures Connected by Bearings, Journal of Sound and Vibration, 211(3), 365-388, 1998. [J100]

  • R. Singh and B.C. Nakra, Report on the Proceedings of 1996 India-USA Symposium on Emerging Trends in Vibration and Noise Engineering, Journal of Sound and Vibration, 211(3), 295-299, 1998. [J099]

  • S.W. Kung and R. Singh, Vibration Analysis of Beams with Multiple Constrained Layer Damping Patches, Journal of Sound and Vibration, 212(5), 781-805, 1998. [J098]

  • S.W. Kung and R. Singh, Complex Eigensolutions of Rectangular Plates with Damping Patches, Journal of Sound and Vibration, 216(1), 1-28, 1998. [J097]

  • C.M. Richards and R. Singh, Identification of Multi-Degree-of-Freedom Nonlinear Systems Under Random Excitations by the “Reverse Path” Spectral Method, Journal of Sound and Vibration, 213(4), 673-708, 1998. [J096]

  • T.J. Royston and R. Singh, Study of Non-linear Hydraulic Engine Mounts Focusing on Decoupler Modeling and Design, SAE Transactions Journal of Passenger Cars, 6, 106(2), 2759-2769, 1997. [J095]

  • T.J. Royston and R. Singh, Vibratory Power Flow Through a Nonlinear Path into a Multi-Resonant Receiver, Journal of Acoustical Society of America, 101(4), 2059-2069, 1997. [J094]

  • R. Gunda, S.M. Vijayakar and R. Singh, Flexural Vibration of an Infinite Wedge, Journal of Acoustical Society of America, 102(1), 326-334, 1997. [J093]

  • H.R. Castner and R. Singh, Pulsed vs. Steady Current GMAW: Which is Louder?, Welding Journal, 76(11), 47-51, Nov. 1997. [J092]

  • C. Padmanabhan and R. Singh, Analysis of Periodically Forced Non-Linear Hills Oscillator with Application to a Geared System, Journal of Acoustical Society of America, 99(1), 324-334, 1996. [J091]

  • T.E. Rook and R. Singh, Mobility Analysis of Structure-Borne Noise Power Flow Through Bearings in Gearbox-Like Structures, Noise Control Engineering Journal, 44(2), 69-78, 1996. [J090]

  • T.E. Rook and R. Singh, Modal Truncation Issues in Synthesis Procedures for Vibratory Power Flow and Dissipation, Journal of Acoustical Society of America, 99(4), 2158-2166, 1996. [J089]

  • H. Vinayak and R. Singh, Eigensolutions of Annular-like Elastic Disks with Intentionally Removed or Added Material, Journal of Sound and Vibration, 192(4), 741-769, 1996. [J088]

  • J.E. Farstad and R. Singh, Effects of Modal Truncation Errors on Transmitted Dynamic Power Estimates in Discretely Joined Component Assemblies, Journal of Acoustical Society of America, 100(5), 3144-3158, 1996. [J087]

  • T.J. Royston and R. Singh, Periodic Response of a Nonlinear, Multi-Dimensional Vibration Mounting System by an Enhanced Galerkin Technique, Journal of Sound and Vibration, 194(2), 243-263, 1996. [J086]

  • T.J. Royston and R. Singh, Optimization of Passive and Active Nonlinear Vibration Mounting Systems Based on Vibratory Power Transmission, Journal of Sound and Vibration, 194(3), 295-316, 1996. [J085]

  • T.J. Royston and R. Singh, Experimental Study of a Mechanical System Containing a Local Continuous Stiffness Nonlinearity Under Periodic Excitation and a Static Load, Journal of Sound and Vibration, 198(3), 279-298, 1996. [J084]

  • G. W. Blankenship and R. Singh, Analytical Solution for Modulation Side Bands Associated with a Class of Mechanical Oscillators, Journal of Sound and Vibration, 179(1), 13-36, 1995. [J083]

  • G. Kim and R. Singh, Study of Passive and Adaptive Hydraulic Engine Mount Systems with Emphasis on Nonlinear Characteristics, Journal of Sound and Vibration, 179(3), 427-453, 1995. [J082]

  • G. W. Blankenship and R. Singh, A New Gear Mesh Interface Dynamic Model to Predict Multi-Dimensional Force Coupling and Excitation, Mechanism and Machine Theory Journal, 30(1), 43-57, 1995. [J081]

  • G.W. Blankenship and R. Singh, Dynamic Force Transmissibility in a Helical Gear Pair, Mechanism and Machine Theory Journal, 30(3), 323-339, 1995. [J080]

  • C. Padmanabhan, R.C. Barlow, T.E. Rook and R. Singh, Computational Issues Associated with Gear Rattle Analysis, ASME Journal of Mechanical Design, 117(1), 185-192, 1995. [J079]

  • J.E. Farstad and R. Singh, Structurally Transmitted Dynamic Power in Discretely Joined Damped Component Assemblies, Journal of Acoustical Society of America, 97(5-1), 2855-2865, 1995. [J078]

  • T.E. Rook and R. Singh, Power Flow Through Multi-Dimensional Compliant Joints Using Mobility and Modal Approaches, Journal of Acoustical Society of America, 97(5-1), 2882-2891, 1995. [J077]

  • T.E. Rook and R. Singh, Dynamic Analysis of a Reverse - Idler Gear Pair with Concurrent Clearances, Journal of Sound and Vibration, 182(2), 303-322, 1995. [J076]

  • C. Padmanabhan and R. Singh, Analysis of Periodically Excited Non-Linear Systems by a Parametric Continuation Technique, Journal of Sound and Vibration, 184(1), 35-58, 1995. [J075]

  • C. Padmanabhan and R. Singh, Dynamics of a Piece-wise Nonlinear System Subject to Dual-Excitation by Parametric Continuation Technique, Journal of Sound and Vibration, 184(5), 767-799, 1995. [J074]

  • M.R. Lee, C. Padmanabhan and R. Singh, Dynamic Analysis of a Brushless D.C. Motor by Using a Modified Harmonic Balance Method, Journal of Dynamic Systems, Measurement and Control, 117(3), 283-291, 1995. [J073]

  • H. Vinayak, R. Singh, and C. Padmanabhan, Linear Dynamic Analysis of Multi-Mesh Transmissions Containing External, Rigid Gears, Journal of Sound and Vibration, 185(1), 1-32, 1995. [J072]

  • R. Gunda, S.M. Vijayakar, and R. Singh, Method of Images for the Harmonic Response of Beams and Rectangular Plates, Journal of Sound and Vibration, 185(5), 791-808, 1995. [J071]

  • P.J. Mucci and R. Singh, Active Vibration Control of a Beam Subjected to AM or FM Disturbances, Noise Control Engineering Journal, 43(5), 159-171, 1995. [J070]

  • T.C. Lim and R. Singh, Vibration Transmission Through Rolling Element Bearings, Part V: Effect of Distributed Contact Load on Roller Bearing Stiffness Matrix, Journal of Sound and Vibration, 169(4), 547-553, 1994. [J069]

  • M.R. Lee and R. Singh, Analytical Formulation for Annular Disk Sound Radiation Using Structural Modes, Journal of Acoustical Society of America, 95(6), 3311-3323, 1994. [J068]

  • C. Lee and R. Singh, Analysis of Discrete Vibratory System with Parameter Uncertainties. Part II: Impulse Response, Journal of Sound and Vibration, 174(3), 395-412, 1994. [J067]

  • C. Lee and R. Singh, Analysis of Discrete Vibratory System with Parameter Uncertainties. Part I: Eigensolutions, Journal of Sound and Vibration, 174(3), 379-394, 1994. [J066]

  • J.E. Farstad, M.R. Lee and R. Singh, Analysis of Structure-borne and Radiated Sound Using Component Modal Bases, Applied Acoustics, 43(3), 217-246, 1994. [J065]

  • G. Kim and R. Singh, Nonlinear Analysis of Automotive Hydraulic Engine Mount, ASME Journal of Dynamic Systems, Measurement and Control, 115(3), 482-487, 1993. [J064]

  • L.E. Schroeder and R. Singh, Experimental Study of Friction in a "Pneumatic Actuator at Constant Velocity, ASME Journal of Dynamic Systems, Measurement and Control, 115(3), 575-577, 1993. [J063]

  • T. Royston and R. Singh, Development of a Pulse -Width Modulated Pneumatic Rotary Valve for Actuator Position Control, ASME Journal of Dynamic Systems, Measurement and Control, 115(3), 495-505, 1993. [J062]

  • J.Y. Lai, R. Singh and C. H. Menq, Pneumatic Pressure and Position Control Using Learning Law, Journal of Fluid Control, 21(4), 64-88, 1993. [J061]

  • R. Singh and C. Lee, Frequency Response of Linear Dynamic Systems with Parameter Uncertainties, Journal of Sound and Vibration, 168(1), 71-92, 1993. [J060]

  • A. Kahraman and R. Singh, Dynamics of an Oscillator with Both Clearance and Continuous Non-Linearities, Journal of Sound and Vibration, 153(1), 180-185, 1992. [J059]

  • C. Kunt and R. Singh, Application of Floquet Theory to On-Off Controlled Pneumatic Actuators, ASME Journal of Dynamic Systems, Measurement and Control, 114(2), 299-305, 1992. [J058]

  • G.W. Blankenship and R. Singh, New Rating Indices for Gear Noise Based Upon Vibro-Acoustic Measurements, Noise Control Engineering Journal, 38(2), 81-92, 1992. [J057]

  • C. Padmanabhan and R. Singh, Spectral Coupling Issues for a Two Degree of Freedom System with Clearances, Journal of Sound and Vibration, 155(2), 209-230, 1992. [J056]

  • R. Singh, G. Kim and P.V. Ravindra, Linear Analysis of an Automotive Hydro-Mechanical Mount with Emphasis on Decoupler Characteristics, Journal of Sound and Vibration, 158(2), 219 - 243, 1992. [J055]

  • T.C. Lim and R. Singh, Vibration Transmission Through Rolling Element Bearings. Part IV: Statistical Energy Analysis, Journal of Sound and Vibration, 153(1), 37-50, 1992. [J054]

  • S.S. Nair, R. Singh, K.J. Waldron and V.J. Vohnout, Power System of a Multi-Legged Walking Machine, Robotics and Autonomous Systems, 9, 149-163, 1992. [J053]

  • M-R Lee and R. Singh, Identification of Pure Tones Radiated by a Computer Disk Drive, Noise Control Engineering Journal, 39(2), 67-75, 1992. [J052]

  • S.S. Nair, R. Singh and K.J. Waldron, Hydraulic Actuation System for Legged Locomotion, Journal of Fluid Control, 21(2-3), 67 - 95, 1992. [J051]

  • G. Prater, Jr. and R. Singh, Complex Modal Analysis of Non proportionally Damped Continuous Rods, International Journal of Analytical and Experimental Modal Analysis, 6(1), 12-24, 1991. [J050]

  • A. Kahraman and R. Singh, Error Associated with a Reduced Order Linear Model of Spur Gear Pair, Journal of Sound and Vibration, 149(3), 495-498, 1991. [J049]

  • A. Kahraman and R. Singh, Interactions between Time-Varying Mesh Stiffness and Clearance Non-Linearities in a Geared System, Journal of Sound and Vibration, 146(1), 135-156, 1991. [J048]

  • A. Kahraman and R. Singh, Non-linear Dynamics of a Geared-Rotor Bearing System with Multiple Clearances, Journal of Sound and Vibration, Vol. 144(3), 469-506, 1991. [J047]

  • T.C. Lim and R. Singh, Statistical Energy Analysis of a Gearbox with Emphasis on the Bearing Path, Noise Control Engineering Journal, 37(2), 63-69, 1991. [J046]

  • T.C. Lim and R. Singh, Vibration Transmission Through Rolling Element Bearings. Part III: Geared Systems Studies, Journal of Sound and Vibration, 151(1), 31-54, 1991. [J045]

  • T.C. Lim and R. Singh, Vibration Transmission Through Rolling Element Bearings. Part II: System Studies, Journal of Sound and Vibration, 139(2), 201-225, 1990. [J044]

  • T.C. Lim and R. Singh, Vibration Transmission Through Rolling Element Bearings. Part I: Bearing Stiffness Formulation, Journal of Sound and Vibration, 139(2), 179-199, 1990. [J043]

  • A. Kahraman and R. Singh, Non-linear Dynamics of a Spur Gear Pair, Journal of Sound and Vibration, 142(1), 49-75, 1990. [J042]

  • R.J. Comparin and R. Singh, An Analytical Study of Automotive Neutral Gear Rattle, ASME Journal of Mechanical Design, 112(2), 237-245, 1990. [J041]

  • R.J. Comparin and R. Singh, Frequency Response of a Multi-Degree of Freedom System with Clearances, Journal of Sound and Vibration, 142(1), 101-124, 1990. [J040]

  • M.S. Tavakoli and R. Singh, Modal Analysis of a Hermetic Can, Journal of Sound and Vibration, 136(1), 141-145, 1990. [J039]

  • J.Y. Lai, C.H. Menq and R. Singh, Pressure Control of a Pneumatic Chamber, Journal of Fluid Control, 19(4), 7-31, 1990. [J038]

  • J. E. Farstad and R. Singh, An Acoustic Transfer Matrix Model for a Refrigeration Condenser, Journal of Sound and Vibration, 138(2), 337-340, 1990. [J037]

  • G. Prater, Jr. and R. Singh, Eigenproblem Formulation, Solution, and Interpretation for Non-proportionally Damped Continuous Beams, Journal of Sound and Vibration, 143(1), 125-142, 1990. [J036]

  • J.Y. Lai, C.H. Menq and R. Singh, Accurate Position Control of a Pneumatic Actuator, ASME Journal of Dynamic Systems, Measurement and Control, 112(4), 734-739, 1990. [J035]

  • C. Kunt and R. Singh, A Linear Time Varying Model for On-Off Valve Controlled Pneumatic Actuators, ASME Journal of Dynamic Systems, Measurement and Control, 112(4), 740-747, 1990. [J034]

  • M.S. Tavakoli and R. Singh, State Space Modeling of Refrigeration Compressor Shell Dynamics, ASHRAE Transactions, 95(1), Paper # 3214, 1989. [J033]

  • M.S. Tavakoli and R. Singh, Eigensolutions of Joined/Hermetic Shell Structures Using the State Space Method, Journal of Sound and Vibration, 130(1), 97-123, 1989. [J032]

  • R. Singh, H. Xie and R.J. Comparin, Analysis of Automotive Neutral Gear Rattle, Journal of Sound and Vibration, 131(2), 177-196, 1989. [J031]

  • R. J. Comparin and R. Singh, Nonlinear Frequency Response Characteristics of an Impact Pair, Journal of Sound and Vibration, 134(2), 259-290, 1989. [J030]

  • R. Singh, W.M. Lyons and G. Prater, Complex Eigensolution for Longitudinally Vibrating Bars with a Viscously Damped Boundary, Journal of Sound and Vibration, 133(2), 364-367, 1989. [J029]

  • A Maalej, R. Singh and D.A. Guenther, Effect of Friction on the Dynamic Response of an Actuator, National Conference on Fluid Power Journal, 1-11, 1988. [J028]

  • R. Singh, Case History: The Effect of Radial Slots on the Noise of Idling Circular Saws, Noise Control Engineering Journal, 31(3), 167-172, 1988. [J027]

  • Y.T. Wang and R. Singh, Frequency Response of a Nonlinear Pneumatic System, Journal of Applied Mechanics, 54(1), 209-214, 1987. (Also, Discussion on p. 745 of Vol. 54.) [J026]

  • G.C. Steyer, R. Singh and D.R. Houser, Alternative Spectral Formulations for Acoustic Velocity Measurement, Journal of Acoustical Society of America, 81(6), 1955-1961, 1987. [J025]

  • R. Singh, J. J. Nieter and G. Prater, An Investigation of the Compressor Slugging Phenomenon, ASHRAE Transactions, 92(1), 250-258, 1986. [J024]

  • G. Prater, Jr. and R. Singh, Quantification of the Extent of Non-proportional Viscous Damping in Discrete Vibratory Systems, Journal of Sound and Vibration, 104(1), 109-125, 1986. [J023]

  • S. S. Nair and R. Singh, Examination of the Validity of Proportional Damping Approximations Using Two Numerical Indices, Journal of Sound and Vibration, 104(2), 348-350, 1986. [J022]

  • H. R. Busby, C. Nopporn and R. Singh, Experimental Modal Analysis of Nonlinear Systems: A Feasibility Study, Journal of Sound and Vibration, 108(3), 415-427, 1986. [J021]

  • Y.T. Wang and R. Singh, Pneumatic Chamber Nonlinearities, Journal of Applied Mechanics, 53(4), 956-958, 1986. [J020]

  • C. H. Kung and R. Singh, Finite Element Modeling of Annular-like Acoustic Cavities, Journal of Vibration, Acoustics, Stress and Reliability in Design, 107(1), 81-85, 1985. [J019]

  • C. H. Kung and R. Singh, Experimental Modal Analysis Technique for Three-Dimensional Acoustic Cavities, Journal of Acoustical Society of America, 77(2), 731-738, 1985. [J018]

  • Y. T. Wang, R. Singh, H. C. Yu, and D. A. Guenther, Computer Simulation of a Shock- Absorbing Pneumatic Cylinder, Journal of Sound and Vibration, 93(3), 353-364, 1984. [J017]

  • J. J. Nieter and R. Singh, A Computer Simulation Study of Compressor Tuning Phenomena, Journal of Sound and Vibration, 97(3), 475-488, Dec. 1984. [J016]

  • R. Singh, Acoustic Impedance Measurement Techniques, Shock and Vibration Digest, 14(2), 3-9, 1982. [J015]

  • R. J. Comparin, J. R. Rapp and R. Singh, Measurement of Acoustic Intensity in the Presence of One-Dimensional Fluid Flow, Journal of Acoustical Society of America, 72(1), 7-12, 1982. [J014]

  • Y. T. Wang, R. Singh and D. A. Guenther, Modeling of an Impulse- Absorbing Pneumatic Cylinder, Journal of Sound and Vibration, 82(4), 598-600, 1982. [J013]

  • J. J. Nieter and R. Singh, Acoustic Modal Analysis Experiment, Journal of Acoustical Society of America, 72(2), 319-326, 1982. [J012]

  • R. Singh and C.H. Kung, Simulating the Response to a Sonic-Boom, Simulation, 39(2), 43-48, 1982. [J011]

  • T. Merriman and R. Singh, Modal Analysis of a Human Head Impact Simulator, Journal of Sound and Vibration, 84(1), 156-159, 1982. [J010]

  • R. Singh, Modeling of Fluid Transients in Machines. Part I: Basic Considerations, Shock and Vibration Digest, 12(6), 7-14, 1980. [J009]

  • R. Singh, Modeling of Fluid Transients in Machines. Part II: Advanced Considerations, Shock and Vibration Digest, 12(7), 11-17, 1980. [J008]

  • R. Singh and W. Soedel, Mathematical Modeling of Multicylinder Compressor Discharge System Interactions, Journal of Sound and Vibration, 62(4), 125-143, 1979. [J007]

  • R. Singh and W. Soedel, Interpretations of Gas Oscillations in Multicylinder Fluid Machinery Manifolds Using Lumped Parameter Descriptions, Journal of Sound and Vibration, 64(3), 387-402, 1979. [J006]

  • R. Singh and W. Soedel, An Efficient Method of Measuring Impedances of Fluid Machinery Manifolds, Journal of Sound and Vibration, 56(1), 105-125, 1978. [J005]

  • R. Singh and T. Katra, Development of an Impulse Technique for Measurement of Muffler Characteristics, Journal of Sound and Vibration, 56(2), 279-298, 1978. [J004]

  • R. Singh and W. Soedel, Assessment of Fluid-Induced Damping in Refrigeration Machinery Manifolds, Journal of Sound and Vibration, 57(3), 449-452, 1978. [J003]

  • R. Singh and T. Katra, On the Digital Generation of an Acoustic Excitation Impulse, Journal of Sound and Vibration, 58(3), 459-462, 1978. [J002]

  • R. Singh and M. Schary, Acoustic Impedance Measurement Using Sine Sweep Excitation and Known Volume Velocity Technique, Journal of Acoustical Society of America, 64(4), 995-1005, 1978. [J001]