The Ohio State University

www.osu.edu

  1. Help
  2. Campus map
  3. Find people
  4. Webmail
  5. Search Ohio State

The Ohio State University

Conference Papers


  • R. Singh, Murphy Strikes Again – Readers Sound Off, Sound & Vibration, July 2009 (page 5), www.SandV.com. [M09-1]
  • B. Kim, G. Washington, and R. Singh, Active Vibration Attenuation of Smart Material Systems with Model-Based and Nonlinear Multispectral Controllers, Paper # SMASIS2009-1355, Proceedings of the ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2009, Oxnard, California, September 20-24, 2009 [C09-3]
  • R. Singh, Gear Noise:Anatomy, Prediction and Solutions, Paper # 666, INTER-NOISE 2009, Ottawa, Canada, August 23-26, 2009. [C09-2]
  • J.Y. Park and R. Singh, Vibration Analysis of Powertrain Mounting System with a Combination of Active and Passive Isolators with Spectrally-Varying Properties, SAE Paper # 2009-01-2034, 2009 SAE Noise and Vibration Conference. [C09-1]
  • M. Inalpolat, M. Caliskan and R. Singh, Sound Radiated by a Resonant Plate: Comparative Evaluation of Experimental and Computational Methods, Paper # 136, NOISE-CON 2008, Dearborn, Michigan, July. 28-30, 2008. [C08-1]
  • C. Duan and R. Singh, Dynamic Responses of a Drivetrain System with Dry Friction Clutch under Time-Varying Normal Load, Paper # 095, INTER-NOISE 2008, Shanghai, China, Oct. 26-29, 2008. [C08-2]
  • A. R. Crowther, C. Halsea, Z. Zhanga, and R. Singh, An Assessment of Smoothening Functions Applied to the Gear Rattle Model, Paper # 795, INTER-NOISE 2008, Shanghai, China, Oct. 26-29, 2008. [C08-3]
  • R. Singh, Murphy's Laws of Noise and Vibration Sources, Sound & Vibration, June 2008 (page 5), www.SandV.com. [M08-1]
  • R. Singh, Attracting Younger Professionals to Technical Conferences, Editorial, Sound & Vibration, Sept. 2007 (page 3), www.SandV.com. [M07-1]
  • Y. Zhang, R. Singh and B. Wen, Rank Ordering and Parameter Contributions of Parallel Vibration Transfer Path Systems, APVC 2007, 12th Asia Pacific Vibration Conference, Hokkaido University, Sapporo, Japan, Aug. 6-9, 2007. [C07-14]
  • C. Duan and R. Singh, Dynamics of a Torsional System with Harmonically Varying Dry Friction Torque, 2nd International Symposium on Nonlinear Dynamics, Shanghai, China, Oct. 27-30, 2007. [C07-13]
  • S. He, R. Singh and G. Pavic, Improved Gear Whine Model with Focus on Friction-induced Structure-borne Noise, Paper # 274, NOISE-CON 2007, Reno, NV, Oct. 22-24, 2007. [C07-12]
  • R. Singh, A. Lake, V. Asnani and S. He, Vibro-Acoustic Model of a Geared System Including Friction Excitation, Paper # 663296, INTER-NOISE 2007, Istanbul, Turkey, Aug. 28-31, 2007. [C07-11]
  • S. He and R. Singh, Analytical Study of Helical Gear Dynamics with Sliding Friction using Floquet Theory, Paper # DETC2007/PTG-34078, 10th ASME International Power Transmission and Gearing Conference, Las Vegas, NV, Sept. 4-7, 2007. [C07-10]
  • S. He and R. Singh, Dynamic Interactions between Sliding Friction and Tip Relief in Spur Gears, Paper # DETC2007/PTG-34077, 10th ASME International Power Transmission and Gearing Conference, Las Vegas, NV, Sept. 4-7, 2007. [C07-9]
  • J. Y. Park and R. Singh, Effect of Engine Mount Damping on the Torque Roll Axis Decoupling, SAE Paper # 2007-01-2418, SAE Noise and Vibration Conference, May 15-17, 2007. [C07-8]
  • S. He and R. Singh, Incorporation of Non-Linear and Quasi-Linear Hydraulic Mount Formulations into a Vehicle Model, SAE Paper # 2007-01-2367, SAE Noise and Vibration Conference, May 15-17, 2007. [C07-7]
  • S. He and R. Singh, Transient Response of Hydraulic Engine Mount to a Realistic Excitation: Improved Non-Linear Models and Validation, SAE Paper # 2007-01-2365, SAE Noise and Vibration Conference, May 15-17, 2007. [C07-6]
  • A. R. Crowther, J. Yoon and R. Singh, An Explanation for Brake Groan Based on Coupled Brake-Driveline System Analysis, SAE Paper # 2007-01-2260, SAE Noise and Vibration Conference, May 15-17, 2007. [C07-5]
  • J. S. Gurm, W. J. Chen, A. Keyvanmanesh, T. Abe, A. R. Crowther and R. Singh, Transient Clunk Response of a Driveline System: Laboratory Experiment and Analytical Studies, SAE Paper # 2007-01-2233, SAE Noise and Vibration Conference, May 15-17, 2007. [C07-4]
  • A. Inoue and R. Singh, Errors Associated with Transfer Path Analysis when Rotations are not Measured, SAE Paper # 2007-01-2179, SAE Noise and Vibration Conference, Mqy 15-17, 2007. [C07-3]
  • M. S. Young, M. Tiwari and R. Singh, Identification of Joint Stiffness Matrix Using a Decomposition Technique, Paper # 187, XXV International Modal Analysis Conference, Orlando, FL, Feb. 19-22, 2007. [C07-2]
  • R. Singh and S. He, Anatomy of a Real-Life Non-Linear Device: Hydraulic Engine Mount, Paper # 109, XXV International Modal Analysis Conference, Orlando, FL, Feb. 19-22, 2007. [C07-1]
  • R. Singh and S. Kim, Structure-borne Noise Transmission Through Multiple/Multi-Dimensional Transfer Paths, Key Note Lecture, NOVEM 2005, France, Apr. 2005. [C05-7]
  • S. Kim, A. Inoue and R. Singh, Experimental Study of Structure-Borne Noise Transfer Paths Over Mid Frequency Regime, SAE Paper # 2005-01-2338, 2005 SAE Noise and Vibration Conference. [C05-6]
  • A. Crowther, N. Zhang and R. Singh, Development of a Clunk Simulation Model for a Rear Wheel Drive Vehicle with Automatic Transmission, SAE Paper # 2005-01-2292, 2005 SAE Noise and Vibration Conference. [C05-5]
  • W. Oh and R. Singh, Examination of Clunk Phenomena using a Non-Linear Torsional Model of a Front-Wheel Drive Vehicle with Manual Transmission, SAE Paper # 2005-01-2291, 2005 SAE Noise and Vibration Conference. [C05-4]
  • C. Duan and R. Singh, Stick-Slip Behavior of Torque Converter Clutch SAE Paper # 2005-01-2456, 2005 SAE Noise and Vibration Conference. [C05-3]
  • S. He and R. Singh, Prediction of High Frequency Response Characteristics of Hydraulic Mounts, SAE Paper # 2005-01-2410, 2005 SAE Noise and Vibration Conference. [C05-2]
  • S. He and R. Singh, Improved Estimation of Linear and Nonlinear Hydraulic Mount Models for Transient Responses, SAE Paper # 2005-01-2411, 2005 SAE Noise and Vibration Conference. [C05-1]
  • V. Asnani, R. Singh and S. Yurkovich, Active Control of Modulated Sounds in a Duct, ACTIVE 04 Conference, Sept. 20-22, 2004. [C04-2]
  • C. Richards, M. Brenner and R. Singh, Identification of a Nonlinear Aeroelastic Aircraft Wing Model, AIAA-2004-1941 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Palm Springs, CA, Apr. 2004. [C04-1]
  • R. Gunda and R. Singh, Dynamic Analysis of Sliding Friction in a Gear Pair, Paper # PTG2003-137, ASME/AGMA 2003 International Power Transmission and Gearing Conference, Chicago, IL, Sept. 2003. [C03-7]
  • S. Kim and R. Singh, Structure-Borne Noise Measures and Their Correlation to Sound Radiation over a Broad Range of Frequencies, SAE Paper # 2003-01-1450, 2003 SAE Noise and Vibration Conference, May 2003. [C03-6]
  • S. Kim and R. Singh, Examination of Some Vibration Isolator Models and Their Effects on Vibration and Structure-borne Noise Transmission, SAE Paper # 2003-01-1477, 2003 SAE Noise and Vibration Conference, May 2003. [C03-5]
  • H. Lee and R. Singh, Sound Radiation from a Disk Brake Rotor Using a Semi-Analytical Method, SAE Paper # 2003-01-1620, 2003 SAE Noise and Vibration Conference, May 2003. [C03-4]
  • P. Mehta and R. Singh, Effect of Welded or Glued Joints on Modal Properties of an Assembly, SAE Paper # 2003-01-1717, 2003 SAE Noise and Vibration Conference, May 2003. [C03-3]
  • P. Mehta and R. Singh, Estimation of Dynamic Stiffness Matrix of Welded or Glued Joints Using a Laboratory Fixture, SAE Paper # 2003-01-1710, 2003 SAE Noise and Vibration Conference, May 2003. [C03-2]
  • M.G. Foulkes, J. P. DeClerck and R. Singh, Vibration Characteristics of Cardboard Inserts in Shells, SAE Paper # 2003-01-1489, 2003 SAE Noise and Vibration Conference, May 2003. [C03-1]
  • S. Kim and R. Singh, Effect of Source Characteristics on Structure-borne Noise in an Isolation System over Mid and High Frequencies, Paper # N510, The 2002 International Congress and Exposition on Noise Control Engineering (INTER-NOISE 2002), Aug. 2002. [C02-5]
  • H. Lee and R. Singh, Vibro-Acoustics of a Brake Rotor with Focus on Squeal Noise, Paper # N614, INTER-NOISE 2002, Aug. 2002. [C02-4]
  • T. C. Kim and R. Singh, Frequency Domain Analysis of Rattle in Gear Pairs and Clutches, Paper # N613, CD-ROM, INTER-NOISE 2002, Aug. 2002. [C02-3]
  • P. Wickramarachi, R. Singh and G. Bailey, Analysis of Friction-Induced Vibration Leading to Eek Noise in a Dry Friction Clutch, Paper # N175, INTER-NOISE 2002, Aug. 2002. [C02-2]
  • R. Singh, H. Adiguna, M. Tiwari, H. Tseng and D. Hrovat, Transient Response of a Hydraulic Engine Mount, Paper # N509, INTER-NOISE 2002, Aug. 2002. [C02-1]
  • R. Singh and S. Kim, Structure-borne Noise Measures for a Multi-Dimensional Vibration Isolation System, Proc. of 2001 India-USA Symposium on Emerging Trends in Vibration and Noise Engineering (CD-ROM), Dec. 2001. [C01-7].
  • T. C. Kim and R. Singh, Dynamic Interactions Between Loaded and Unloaded Gear Pairs Under Rattle Conditions, Proc. of 2001 India-USA Symposium on Emerging Trends in Vibration and Noise Engineering (CD-ROM), Dec. 2001. [C01-6].
  • R. Singh and S. Kim, Vibrational Power Flow Considerations Arising From Multi-Dimensional Isolators, Paper #235, INTER-NOISE 2001, Aug. 2001. [C01-5]
  • J. Kim and R. Singh, Effect of Visco-Elastic Patch Damping on Casing Cover Dynamics, SAE Paper # 2001-01-1463, 2001 SAE Noise and Vibration Conference, May 2001. [C01-4]
  • S. Kim and R. Singh, Vibration Power Transmission Through Multi-Dimensional Isolation Paths over High Frequencies, SAE Paper # 2001-01-1452, 2001 SAE Noise and Vibration Conference, May 2001. [C01-3]
  • S. Kim and R. Singh, Examination of High Frequency Characterization Methods for Mounts, SAE Paper # 2001-01-1444, 2001 SAE Noise and Vibration Conference, May 2001. [C01-2]
  • T.C. Kim and R. Singh, Dynamic Interactions Between Loaded and Unloaded Gear Pairs Under Rattle Conditions, SAE Paper # 2001-01-1553, 2001 SAE Noise and Vibration Conference, May 2001. [C01-1]
  • R. Singh, H. Adiguna, M. Tiwari, H. Tseng and D. Hrovat, Transient Response Evaluation of a Hydraulic Engine Mount, Sound & Vibration magazine, Jul. 2002, 36 (7), pp. 30 – 35. [M02-1]